USAFluids Analyst
3 дн. назад
USAOnsite
modelingdata analysisfluid dynamicsthermal performance
Responsible for fluids prediction including modeling, analysis, and data management to support fluid system decisions in aerospace applications.
Обязанности
- As a Fluids Analyst, you will own fluids prediction for the team — the models, the analysis, and the data that back every fluid system decision we make. You are accountable for the full lifecycle of that prediction: standing up early system models before hardware exists, sizing and trading architectures against pressure drop, flow capability, and thermal performance, then closing the loop by reducing test data and correlating it back into the models. You will work closely with fluids design, propulsion, thermal, structures, and test operations, and your predictions will directly set or verify component sizing, test objectives, and flight limits. This is a hands-on analysis role for someone who wants to be in the test bay watching the data come in, not just running cases. You’ll be expected
- Own the full lifecycle of fluids prediction and data for the team — from first-order sizing models through correlated, test-anchored models used for flight.
- Build and maintain 1D fluid network and transient system models of engine and vehicle fluid systems to predict pressure drop, flow capability, and thermal performance.
- Perform early-phase simulation and trade studies to inform architecture selection, line and orifice sizing, valve and regulator selection, and pressurization schedules before hardware is committed.
- Predict flow capability and pressure budgets across the system: line and fitting losses, flow distribution and manifold balance, cavitation and choked-flow margin, NPSH, and engine inlet conditions.
- Analyze transient behavior — water hammer, priming and chill-in, valve sequencing, blowdown and ullage collapse, tank pressurization and thermal stratification.
- Perform CFD analysis of valves, manifolds, and other internal-flow components to resolve loss coefficients, flow distribution, and local behavior that lumped models cannot capture.
- Perform thermal-fluid analysis including two-phase and cryogenic behavior, heat leak, insulation performance, and conjugate heat transfer in fluid components.
- Define the instrumentation and measurement requirements needed to validate your models — specify what gets measured, where, at what rate, and to what accuracy.
- Support component-level and system-level test campaigns: write analysis-driven test objectives and predictions and set red lines and expected values.
- Own reduction and analytics of fluids test data — build the data pipelines, automate processing across runs, quantify uncertainty, and turn raw channels into engineering quantities.
- Correlate models against test and flight data, quantify model error, and drive the updates that improve predictive accuracy over time.
- Establish and maintain the team's analysis methods, model libraries, fluid property data, and validation standards so results are repeatable and reviewable.
- Perform anomaly investigation and root cause analysis using test and flight data; reconstruct off-nominal events and recommend corrective action.
- Balance model fidelity against schedule — know when a hand calculation is sufficient and when the problem warrants CFD.
- Communicate analysis results and their uncertainty clearly to designers, test engineers, and leadership, and document methods, assumptions, and conclusions in review-ready form.
Требования
- Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Chemical Engineering, or related field.
- 5+ years of experience performing fluid system analysis for flight vehicles, propulsion systems, or other high-performance hardware.
- Strong fundamentals in fluid mechanics, thermodynamics, and heat transfer, including compressible flow, two-phase flow, and transient system behavior.
- Experience building 1D fluid network or transient system models with tools such as Flownex, AFT (Fathom/Arrow/Impulse), EASY5, GFSSP, Simulink, or equivalent in-house codes.
- Hands-on experience with commercial or open-source CFD (ANSYS Fluent, Siemens STAR-CCM+, or OpenFOAM) applied to internal flow problems.
- Proficiency with Python (NumPy, pandas) or MATLAB for model development, data reduction, and automation of analysis workflows.
- Experience reducing and interpreting real test data, including correlating analytical predictions against measurements.
- Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
- Export Control Requirement: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicants must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here .
Будет плюсом
- 10+ years of experience performing fluid system analysis for flight vehicles, propulsion systems, or other high-performance hardware.
- Direct experience with rocket engine, launch vehicle, or spacecraft propulsion fluid systems.
- Experience with cryogenic fluids (LOX, methane, hydrogen, nitrogen, helium), including chill-in, two-phase transients, and thermal stratification.
- Familiarity with real-fluid property libraries and equations of state (REFPROP, CoolProp, NIST data) and their limits of validity.
- Experience analyzing valves, regulators, injectors, or turbopump feed systems, including flow-force and stability behavior.
- Experience supporting propulsion hot-fire testing, cold-flow testing, or vehicle fill/drain operations with live analysis support.
- Experience building automated data pipelines or analytics tooling over large test datasets.
- Familiarity with uncertainty quantification, design of experiments, or statistical model calibration methods.
- Experience with structural or thermal FEA (ANSYS, Nastran, Abaqus) for coupled fluid-structure or conjugate heat transfer problems.
- Familiarity with relevant industry standards (AIAA S-080/S-081, ASME BPVC, SAE, and MIL-spec fluid system standards).
- Experience at a fast-moving, hardware-focused startup or early-stage program.
Условия
- The salary range for this position is $130,000 – $190,000 annually. The actual base salary offered will depend on factors such as job-related skills, experience, qualifications, and internal equity.
- Equity in Cowboy Space Corp.
- Employees and their eligible dependents may enroll in medical, dental, and vision insurance
- 401(k) retirement savings plan
- Paid time off
- 10 paid holidays per calendar year
- Paid parental leave
- Relocation assistance if applicable
- Daily lunch in the office and a fully stocked kitchen with beverages and snacks
Другое
- Cowboy Space Corp. is building the infrastructure to power and connect the orbital economy. Our satellites operate in Low Earth Orbit to collect sunlight and enable a new class of capabilities—from powering on-orbit compute, to transmitting energy via infrared lasers (space-to-earth and space-to-space), to delivering secure, high-bandwidth optical data. By rethinking how energy and data are generated and distributed in space, we’re unlocking entirely new ways to operate both in orbit and on Earth.
- Founded in 2024 by Baiju Bhatt (co-founder of Robinhood), Cowboy Space Corp. is backed by leading investors and built by a team from top aerospace and defense organizations. We’re moving quickly to solve complex technical challenges and build a new category of space infrastructure.
- This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at Cowboy Space Corp.’s discretion.
- Cowboy Space Corp. is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. Cowboy Space Corp. is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions relating to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal