Manufacturing Reliability Engineer (Austin, TX; 50% travel to Milwaukee, WI)

3 нед. назад

USASeniorOnsite

test automationfirmware deploymentprovisioningkpIstest protocols

Responsible for owning production test processes and improving reliability metrics for manufacturing robots.

End-to-end test process ownership. Create, validate, and maintain production test protocols and gating criteria from incoming inspection through final test and shipment.
Provisioning of bots. Design and operate provisioning flows (imaging, firmware deployment, configuration, validation) and the tooling/fixtures needed to provision and handoff robots for production.
KPIs and continuous improvement. Own key production metrics — First Pass Yield (FPY), cycle time, and test coverage — and drive continuous improvements to meet throughput and quality targets.
Test automation & infrastructure. Architect, implement, and maintain automated test frameworks, harnesses, and test rigs used at the CM site. Ensure tests are stable, fast, and provide actionable failure data.
Cross-functional escalation & RCA. Lead root-cause analysis for field and production failures; coordinate corrective actions with design, firmware, and CM engineering to close quality loops.
On-site production leadership. Be the onsite technical authority at the contract manufacturer: train operators, debug failures on the line, and continuously refine processes with CM partners.

5+ years experience in production/test engineering for complex electro-mechanical products (robotics, medical devices, consumer electronics, or similar).
Proven ownership of E2E production test processes and production provisioning at a contract manufacturer (on-site experience strongly preferred).
Deep familiarity with test protocol development: test specification writing, fixture design, automated test implementation, and validation.
Strong hands-on experience with firmware provisioning and validation for sensors and compute (sensor FW + compute/host FW).
Broad technical knowledge across systems integration (ES integration), sensors (e.g., cameras, LiDAR, IMU or similar), embedded compute platforms, and networking/provisioning.
Excellent debugging skills across hardware, firmware, and system software; able to triage complex cross-domain failures.
Strong data-driven mindset: experienced with KPIs (FPY, cycle time, test coverage), statistical process control, and metrics reporting. Outstanding communication skills and experience working closely with contract manufacturers, operators, and cross-functional engineering teams.
Comfortable being onsite full-time at a contract manufacturer and traveling as needed.

Experience with robotics stacks (ROS or equivalent) and robotic sensor calibration/test.
Familiarity with manufacturing automation tools, CI for embedded systems, and test frameworks (Python, pytest, LabVIEW, or similar).
Experience with provisioning large fleets (device identity, secure image signing, automated configuration).

Diligent builds helpful robots that work safely and autonomously in real world environments. We move quickly, solve messy problems, and care deeply about reliability at scale. We’re hiring a Manufacturing Reliability Engineer to own production test for our robots at our contract manufacturer: you’ll design and run robust end-to-end test protocols, provision fleets of robots for production, and own the KPIs that define production quality.
This role is based in Austin, TX. However, the position will require 50% travel to the Milwaukee, WI area and requires close collaboration across software, hardware, operations, and product engineering teams.
Improved FPY and reduced rework rates across production builds.
Reduced per-unit cycle time for test/provisioning while increasing test coverage.
Stable, fully automated provisioning flow with minimal manual intervention.