USAHead of Technical Integration
1 мес. назад
USAHeadRemote
Responsible for technical authority and assurance over engineering, procurement, and construction contracts to ensure conformance with requirements and standards.
Требования
- Bachelor’s Degree in Engineering (mechanical, electrical, civil/structural, nuclear, chemical, or a related discipline) from an ABET-accredited program.
- Strong working knowledge of EPC execution and engineering assurance on complex capital projects.
- Working knowledge of applicable U.S. codes and standards (ASME, IEEE, ANSI) and of nuclear quality assurance requirements (10 CFR 50 Appendix B and ASME NQA-1).
- Experience with modular construction and design for modularization
Будет плюсом
- Professional Engineer (PE) license, or a clear and demonstrable path to licensure, or equivalent.
- Experience on nuclear (NRC-licensed), combined cycle, or first-of-a-kind energy projects.
- Prior experience as an Owner’s Engineer, Owner’s Technical Director, or in an equivalent owner-side technical assurance role.
- Familiarity with modular construction, shipyard/offsite fabrication, and Design for Manufacture and Assembly (DfMA).
- Working knowledge of systems engineering and requirements management practices (e.g., INCOSE).
- Relevant certifications such as PMP, CSEP, Certified Quality Engineer (CQE), or a recognized root cause analysis qualification (e.g., TapRooT, Apollo).
Другое
- ’s mission is to unlock energy abundance, energy affordability, energy security, and turn-key decarbonization by developing the fastest path to deploying new nuclear MWs at scale. We are utilizing shipyard manufacturing supply chains and techniques from offshore oil and wind to reduce the cost of nuclear plants by over 60% and the manufacturing timeline to 24 months. is a platform technology that makes use of the latest NRC-approved reactors and is in negotiations with existing nuclear and industrial sites, enabling a much faster regulatory pathway to deploy our first unit. With our innovative centralized shipyard manufacturing approach, we can put nuclear power on a cost-reduction learning curve akin to wind, solar, and lithium-ion batteries.
- The Head of Technical Integration is the accountable Technical Authority for ’s portfolio of engineering, procurement, and construction (EPC) and engineering services contracts. The role exists to ensure that all deliverables produced under these contracts are delivered in full conformance with the contractual terms, the owner’s requirements, and the applicable codes, standards, processes, and regulatory requirements that govern the work.
- The technical direction of any individual contract sits with the assigned Owner’s Technical Director, who is responsible for technical assurance on that contract. The Head of Technical Integration is accountable for ensuring that technical assurance is consistently defined, applied, and enforced across the entire portfolio of contracts. Where the Design Authority is concerned with whether the right thing is being designed — establishing and owning the owner’s requirements — the Head of Technical Integration is concerned with whether the thing is being designed right. In this capacity the role is the accountable Technical Authority: it owns the engineering standard operating procedures (SOPs), policies, and assurance frameworks that govern how technical work is executed and verified, and co
- The role is accountable for monitoring and reporting the degree of technical compliance across the portfolio, identifying the root causes of non-conformances, and implementing a corrective action program to eliminate those causes and prevent recurrence. The Head of Technical Integration is also accountable for effective technical interface management — between suppliers, and between suppliers and the owner — proactively finding and eliminating gaps and overlaps in scope across supplier boundaries. The role is deeply embedded in design reviews and works closely with the Quality organization, particularly on nuclear safety-related deliverables. The Head of Technical Integration is a principal participant in the management of change process for live contracts, including the technical evaluati
- The position is expected to report to the Engineering Director (or VP of Engineering) and works alongside the Design Authority, the Quality organization, the commercial/contracts function, and the Owner’s Technical Directors. You will have authority over engineering technical assurance standards and the enforcement of technical compliance across the portfolio, and you will be expected to lead and develop a technical integration team to accomplish these objectives.
- Act as the accountable Technical Authority for the contract portfolio, providing independent technical assurance that deliverables conform to the owner’s requirements, the technical baseline, and applicable codes and standards.
- Establish and enforce the technical assurance framework that defines how engineering work is checked, reviewed, verified, and approved across all contracts.
- Provide a consistent point of technical escalation and adjudication where Owner’s Technical Directors require portfolio-level direction or resolution of cross-contract technical issues.
- Confirm that competent, qualified personnel are assigned to technical verification activities and that levels of independent review are commensurate with safety classification and risk.
- Own, develop, and maintain the suite of engineering standard operating procedures (SOPs), policies, and work instructions that govern technical execution and assurance.
- Maintain a controlled register of applicable codes, standards, and regulatory requirements (e.g., ASME BPVC Section III, ASME NQA-1, the ASME B31 piping codes, IEEE, ANSI, and 10 CFR 50 Appendix B) and confirm their correct application to each contract.
- Define and govern requirements management and technical baseline control, ensuring traceability from the owner’s requirements through design, analysis, and verification.
- Establish design verification and validation (V&V) expectations, including checking, independent technical review, and design review standards.
- Define compliance metrics and monitor the degree of technical compliance across the portfolio, providing periodic reporting to leadership.
- Lead the investigation of technical non-conformances and conduct or oversee root cause analysis (RCA).
- Establish and operate a corrective and preventive action (CAPA) program to address systemic causes and prevent recurrence; track actions to closure and verify their effectiveness.
- Identify adverse trends across contracts and drive portfolio-wide technical improvement.
- Own technical interface management between suppliers, and between suppliers and the owner, ensuring continuity of the technical scope across all package boundaries.
- Identify, document, and close gaps and overlaps in scope between suppliers through interface control documents (ICDs), interface registers, and structured interface reviews.
- Confirm that physical, functional, and data interfaces are defined, controlled, and verified across disciplines and systems.
- Lead the resolution of inter-supplier technical conflicts and integration risks.
- Lead the resolution of performance guarantees that may cross scope boundaries.
- Participate in and provide assurance over formal design reviews across the portfolio, including:
- Preliminary Design Reviews (PDR) and Critical Design Reviews (CDR)
- Constructability, operability, and maintainability reviews
- Confirm that review comments, technical queries (TQs), and non-conformances are dispositioned and closed in accordance with procedure.
- Provide independent challenge of design decisions, assumptions, and deviations, ensuring sound engineering judgment and conformance to the design basis.
- Work closely with the Quality organization to align technical assurance with the project quality assurance program, particularly for safety-related and nuclear safety-related deliverables.
- Confirm that safety classification, design basis control, and safety case traceability are maintained across the supply chain in accordance with 10 CFR 50 Appendix B and ASME NQA-1.
- Support supplier audits, surveillances, and assessments, and confirm the closure of associated quality and technical findings.
- Act as a principal technical authority within the management of change (MOC) process for live contracts.
- Lead the technical evaluation of Change Order requests, assessing technical justification, scope impact, design basis impact, schedule and quality consequences, and consistency with the owner’s requirements.
- Apply rigorous technical and commercial scrutiny to confirm that proposed changes are genuinely warranted and fairly scoped, and are not being used to the owner’s disadvantage.
- Confirm that approved changes are correctly reflected in the technical baseline, configuration records, and downstream deliverables.
- Provide technical oversight of supplier performance against contractual technical requirements and deliverable acceptance criteria.
- Apply informed, “intelligent customer” judgment to supplier claims, deviations, concessions, and requests for information to protect the owner’s technical and commercial position.
- Support the contracts and commercial teams with technical input to claims, back-charges, and dispute resolution.
- Lead, build, and develop the technical integration function and supporting team.
- Delegate and prioritize technical assurance activities across the portfolio in line with risk and project priorities.
- Mentor and support Owner’s Technical Directors and engineering staff on assurance expectations and procedures.
- The outputs for which this role is expected to be accountable include, but are not necessarily limited to:
- Approved engineering SOPs, policies, and the technical assurance framework
- A controlled codes-and-standards register and a maintained technical baseline
- Portfolio technical compliance reports, metrics, and dashboards
- Root cause analyses and a tracked, effectiveness-verified corrective and preventive action (CAPA) program
- An interface register and interface control documents (ICDs) evidencing closed scope gaps and overlaps
- Dispositioned design review records and closed technical queries
- Technical evaluations and dispositions of Change Order requests
- Verified conformance of safety-related and nuclear safety-related deliverables
- Minimum 12–15 years of progressive engineering experience on nuclear, power, oil & gas, or large, complex infrastructure projects, inclusive of:
- 5+ years in a technical authority, engineering management, design assurance, or technical integration role
- Demonstrated experience leading design reviews and managing multidisciplinary technical interfaces
- Experience establishing or administering root cause analysis and corrective action programs
- Experience in management of change and the technical evaluation of change orders on live contracts
- 3+ years of team leadership, management, or supervisory experience
- The successful candidate will demonstrate strong technical capability and practical experience across the principal engineering assurance, codes-and-standards, interface, and configuration management disciplines required to enforce technical compliance and integrate the work of multiple suppliers across the project lifecycle.
- Applied knowledge of U.S. design and quality codes and standards, including ASME BPVC (particularly Section III), ASME NQA-1, the ASME B31 piping codes, IEEE, and ANSI, with familiarity with 10 CFR 50 Appendix B.
- Requirements management and technical baseline control.
- Configuration management and engineering change control.
- Root cause analysis and corrective/preventive action (CAPA) methodologies.